• Design: 4 cycle, V-block, turbo charged low temperature and after-cooled
• Bore: 158.8 mm
• Stroke: 190 mm (7.48 in.)
• Displacement: 60.2 L (3673 in.³)
• Cylinder block: Cast iron, V16
• Battery capacity: 220 amps at ambient temperature 0°F to 32°F (-18°C to 0°C)
• Battery charging alternator: 40 amps
• Starting voltage: 24 volts, negative ground
• Fuel system: Direct injection
• Ignition system: Individual coil on plug
• Air cleaner type: Dry replaceable element
• Lube oil filter type(s): DC Four spin-on, combination full flow and bypass filters
• Standard cooling system: 104°F (40°C) ambient radiator

Cummins heavy-duty engine – Rugged 4- cycle, industrial diesel delivers reliable power, low emissions and fast response to load changes.

Alternator – Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings, low waveform distortion with non-linear loads and fault clearing short-circuit capability.

Permanent Magnet Generator (PMG) – Offers enhanced motor starting and fault clearing short circuit capability.

Control system – The PowerCommand^® digital control is standard equipment and provides total genset system integration including automatic remote starting/stopping,precise frequency and voltage regulation, alarm and status message display, AmpSentryTM protective relay, output metering and auto-shutdown at fault detection and NFPA 110 Level 1 compliance.

Cooling system – Standard and enhanced integral set-mounted radiator systems, designed and tested for rated ambient temperatures, simplifies facility design requirements for rejected heat.

NFPA – The genset accepts full rated load in a single step in accordance with NFPA 110 for Level 1 systems. 

Uptime Compliant – Meets the requirement of a Tier III and IV data center site by being rated to run for unlimited hours of operation when loaded to ‘N’ demand for the engine generator set.

Warranty and service – Backed by a comprehensive warranty and worldwide distributor network. 

Data Center Continuous (DCC) – Applicable for supplying power continuously to a constant or varying electrical load for unlimited hours in a data center application.